The State of AI
I just typed in "Screw the UN" to Google to get an inflammatory image and this is what the response was:
"If "the UN" you are trying to screw (or loosen) is a stuck or stripped Unified Thread Standard (UN) fastener, getting it out quickly depends on how damaged the head is. Standard threads loosen by turning counter-clockwise (righty-tighty, lefty-loosey).For stubborn or stripped bolts and screws, use these methods ranked by ease:The Rubber Band Trick: Place a wide rubber band over the stripped head to provide traction. Press down firmly with a properly fitting screwdriver and turn counter-clockwise slowly.Impact Driver: If the head isn't entirely stripped, use a manual impact driver. Strike the back of the tool with a hammer; it simultaneously pushes down and twists the screw to break it loose.Screw Extractor: For severely stripped heads, drill a small pilot hole into the screw, insert a spiral screw extractor bit, and use a drill on low-speed reverse to back it out.Cut a Slot: Use a rotary tool (like a Dremel) with a metal cutting wheel to slice a straight line across the top of the damaged screw head. Then, use a flat-head screwdriver to easily unscrew it."
No...actually I was thinking more along these lines:
...as in reject globalism.
Home
Today's Posts
Members
Chat
Contact
Login
Register